iControl - Web Enabled Power Conditioning Management System

Simplified and sophisticated
power management.

  • Enables users to monitor, control and manage power distribution settings and control individual outlets as well as monitor power usage.

  • Displays real-time values of voltage, total system current draw, total system power draw as well as the total system energy usage

  • Features SurgeX patented Advanced Series Mode Technology and CouVS for the most advanced power protection available Integrates with most control systems

  • Zero let through voltage to the neutral or ground





  • Features
  • Specifications
  • Downloads
  • Product / Warranty Registration
  • Warranty Information

  • Provides premium protection, comprehensive energy management, and two-way communication with all IP-enabled products on the network

  • Controls power on an outlet level, turns outlets on and off, and allows integrators to control expansion units from the master unit

  • Displays power and energy usage per outlet and offers an advanced overview of the system’s energy consumption by each connected device

  • Collects and internally lo-1gs temperature, voltage measurements, and current draw measurements and reports back via a user-friendly energy and power usage display

  • Schedules triggers by outlet, contact closure, or input and output

  • Features SurgeX Advanced Series Mode surge elimination technology that eliminates surge energy up to 6,000 volts, and protects equipment from AC surges and electrical transients, without producing harmful side effects such as ground contamination or common-mode disturbances

  • Includes comprehensive protection, including common and normal mode Impedance Tolerant EMI/RFI filtering, SurgeX ICE Inrush Current Elimination, and COUVS Catastrophic Over/Under Voltage Shutdown

  • Enables full Cervella integration


Load Rating: 
15/20 Amps at 120 Volts (SX-AX15/AX-AX20)

Power Requirement (no load):  4 Watts

Surge Let-through Voltage (6000 Volt surge):  0 Volts

UL 1449 Adjunct Classification Test Results:  1000 surges, 6000 Volts, 3000 Amps, B3 pulse; measured suppressed voltage, 170 Volts; no failures

Federal Guidelines: Grade A, Class 1, Mode 1 (CID A-A-55818)

EMI/RFI Filter, Normal Mode (50 Ohm load): 40 dB @ 100 KHz, 50dB @ 300 KHz, 50 dB @ 3 MHz, 50 dB @ 30 MHz

EMI/RFI Filter, Common Mode (50 Ohm load): 18dB @ 300 KHz, 30 dB @ 1 MHz, 50 dB @ 5 MHz, 50 dB @ 20 MHz

Maximum Applied Surge Voltage:  6000 Volts *

Maximum Applied Surge Current:  Unlimited (due to current limiting) *

Maximum Applied Surge Energy:  Unlimited (due to current limiting) *

Endurance (C62.41-1991 category B3 pulses): 1 KV > 500,000; 3 KV > 10,000; 6 KV > 1000

Undervoltage Shutdown:  Adjustable from 90 Volts to 105 Volts

Overvoltage Shutdown:  Adjustable from 135 Volts to 150 Volts

Network Port: 10/100 Base T Ethernet connection on Female RJ-45

Modem Port: V.92 and below on Female RJ-11 (for models with internal modem option)

Serial Port: 115,200 bps on Female 9-pin D-subminiature

Dimensions:  19” W x 12.25” D x 1.75” H (Single Rack Space)

Weight:  13.0 lb.

Temperature Range:  5C to 35C

Humidity Range:  0% to 95% R.H. Non-condensing

Agency Listings:  ETL and cETL (UL 1449, 3rd Edition; CSA C22.2 No.8-M1986, R2000)

* 1.2 x 50 microsecond industry standard combination wave surge as per IEEE C62.41

*CAUTION:  Do not install this device if there is not at least 10 meters (30 feet) or more between the electrical outlet and the electrical service panel.

User Manual

For Axess Firmware Version Q110630.286 and SCU Version Q110630G.127

download

Quick Start Guide

 

download

SCU User Manual

For Axess Firmware Version Q110630.286 and SCU Version Q110630G.127

download

CUU User Manual

 

download

Firmware Upgrade Manual

For Axess Firmware Version Q110630.286 and SCU Version Q110630G.127

download

Current Firmware

Current version is Q110630.286

download

SNMP MIB

Current version is Q110630

download

CUU Setup (Certificate Upload Utility)

Current version is 1.00.12

download

SCU Setup (Setup and Control Utility)

Current version is 127

download

Firmware Upgrade Utility

Current version is 2.3E

download

All Files (zipped)

Zipped archive contains all the above files

download


Integration Modules

CRESTRON (telnet)

download

CRESTRON (serial)

download

AMX

download

Registration

 

download

Warranty Information

 

download