SurgeX's patented Series Mode® technology is superior to conventional MOV circuitry. It provides proven, reliable protection, stopping multiple surges of up to 6,000 volts, and does not produce ground contamination.

Our entire line meets the most stringent government purchase specifications for powerline surge suppressors. Its A-1-1 rating assures you of dependable protection from destructive spikes, surges and inductive transients.

All of our product specifications are available in Adobe .pdf format.



SurgeX SX2120

The SurgeX SX2120 provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment.

SX2120 surge eliminators are 20-amp load-capable and have 14 industrial grade grounded AC receptacles (2 switched banks of 6; 2 always on) plus a front-panel courtesy receptacle.



>> more >>

SurgeX SEQ

The SEQ provides guaranteed surge protection, power conditioning and sequencing for audio, video, broadcast and computer equipment.

A double rack-space unit, the SEQ features two always-on receptacles and four programmable banks. There are three physical banks of four receptacles each and a fourth ‘virtual’ bank for controlling remote units, allowing for infinitely expanding power distribution schemes.

>> more >>



SurgeX SX1120-RT

The SX1120RT has remote control capability for use in AC power distribution systems and can be interfaced with a sequential controller such as the SurgeX SEQ.

Switched receptacles can be controlled with an applied voltage (5-30 vdc) or contact closure switch connected to the Phoenix connector on the back panel. The connector can also be used to cascade multiple units or provide status to a central controller.

The SX1120RT provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment. The units are 20-amp load-capable and have 8 industrial grade grounded AC receptacles (6 switched, 2 always on) plus a front panel courtesy receptacle.

>> more >>

SurgeX SX1115-RT

The SX1115RT has remote control capability for use in AC power distribution systems and can be interfaced with a sequential controller such as the SurgeX SEQ.

Switched receptacles can be controlled with an applied voltage (5-30 vdc) or contact closure switch connected to the Phoenix connector on the back panel. The connector can also be used to cascade multiple units or provide status to a central controller.

The SX1115RT provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment. The units are 15-amp load-capable and have 8 industrial grade grounded AC receptacles (6 switched, 2 always on) plus a front panel courtesy receptacle.

>> more >>


SurgeX SX1115-RL

The SurgeX SX1115RL is designed for broadcast/recording studios, custom design/build installations and sound reinforcement applications. It has front panel connectors and a dimmer control for 2 Littlite® gooseneck lamps.

The SX1115RL provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment. The units are 15-amp load-capable and have 8 industrial grade grounded AC receptacles (6 switched, 2 always on).

>> more >>

SurgeX SX1115

The SurgeX SX1115 provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment.

The units are 15-amp load-capable and have 8 industrial grade grounded AC receptacles (6 switched; 2 always on) plus a front-panel courtesy receptacle.

The unit features both common mode and normal mode Impedance Tolerant EMI/RFI filtering for a comprehensive power conditioning solution.
>> more >>



SurgeX SX20-NE

The SurgeX SX20NE provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment.

SX20 NE units are 20-amp load-capable, 10" x 8" x 4" NEMA enclosures and meet code for use at the service entrance, sub-panels and in ceiling plenums.

The unit features both common mode and normal mode Impedance Tolerant EMI/RFI filtering for a comprehensive power conditioning solution.

 

 


>> more >>

SurgeX SX20-NE/RT

The SurgeX SX20 NE/RT has remote control capability for use in AC power distribution systems and can be interfaced with a sequential controller such as the SurgeX SEQ.

The unit can be controlled with an applied voltage (5-30 vdc) or a contact closure switch connected to the Phoenix connector terminal block. The connector can also be used to cascade multiple units or provide status to a central controller.

The SX20 NE/RT provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment. The units are 20-amp load-capable, 12" x 12" x 4" NEMA enclosures and meet code for use at the service entrance, sub-panels and in ceiling plenums.

>> more >>


SurgeX SXN240

The SurgeX SXN240 provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment.

The unit comes in a 12" x 12" x 4" NEMA enclosure and meets code for use at the service entrance, sub-panels and in ceiling plenums. The SXN240 is 20-amp load capable, and has two surge suppression modules, one for each 120-volt leg.

The unit features both common mode and normal mode Impedance Tolerant EMI/RFI filtering for a comprehensive power conditioning solution.

>> more >>

SurgeX SXN1240

The SXN1240 provides guaranteed surge protection for dedicated power lines. The unit comes in a 12" x 12" x 4" NEMA enclosure and meets code for use in ceiling plenums.

The SXN1240 is 20-amp load capable and is specifically designed for international use in 240 volt systems with single-phase power requirements. The standard model has one surge suppression module.

The unit features both common mode and normal mode Impedance Tolerant EMI/RFI filtering for a comprehensive power conditioning solution.

>> more >>


SurgeX Powerframe 420

The SurgeX Powerframe 420 provides guaranteed surge protection and power condition-ing for audio, video, broadcast and computer equipment. Powerframe 420 units are compact 80 Amp load centers for multi-branch circuit applications. They offer four independent 20 Amp circuits in a 16" x 12" x 4" magnetic shielding NEMA enclosure and meet code for use at the service entrance, sub-panels and in ceiling plenums.


>> more >>

 


SurgeX SA966 & SA1810

The SA966 and SA1810 provide guaranteed surge protection for audio, video, broadcast, computer and all sensitive electronic equipment.

These units are rated for 8 amps (SA966) and 15 amps (SA1810) and feature industrial grade grounded AC receptacles. When fitted with the optional mounting brackets these standalone units easily mount where you need them.

SurgeX Series Mode technology is superior to conventional MOV circuitry or MOV-Hybrid designs and is completely non-sacrificial. It stops all surges up to 6,000 volts (unlimited surge current) without producing harmful side effects such as ground contamination or common-mode disturbances.






SA966

SA1810

>> more >>

>> more >>

SurgeX SA15 & SA20

The SA15 and SA20 are specifically designed to upgrade and improve surge protection for audio, video, broadcast, computer and all sensitive electronic equipment.

When fitted with the optional mounting brackets these standalone units easily mount where you need them. The SA-15 is rated for 15 amps and SA-20 for 20 amps, and both have two industrial grade grounded AC receptacles. The unit features both common mode and normal mode Impedance Tolerant EMI/RFI filtering for a comprehensive power conditioning solution.

SurgeX Advanced Series Mode technology is superior to conventional MOV circuitry or MOV-Hybrid designs and is completely non-sacrificial. Our zero let-through technology provides the most reliable protection available. It stops all surges up to 6,000 volts (unlimited surge current) without producing harmful side effects such as ground contamination or common-mode disturbances.

SA15

SA20

>> more >>

>> more >>


SurgeX SA82 FlatPak

Specifically Designed To Protect
Flat Panel Monitors


The SA82 provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment. The units are 8-amp load-capable and have 2 industrial grade grounded AC receptacles.

The SA82 utilizes our patented Series Mode® surge protection technology, Impedance Tolerant® EMI/RFI filtering and Over-Voltage-Shutdown which automatically restores power when line voltage returns to a safe level. The unit’s compact design can be easily integrated with today’s Flat Panel monitor mounting systems. The FlatPak™ SA82 is available in both black and silver finishes, comes with a detachable IEC power cord and universal mounting brackets.

>> more >>

 


SurgeX ICE 20C & 20H

SurgeX ICE Inrush Current Elimination technology provides soft turn-on to prevent inrush current problems associated with high ampacity multi-component systems.

Both the ICE 20C and ICE 20H provide remote system control, making magnetic time-delay circuit breakers and their associated installation requirements unnecessary. In addition, ICE inrush current eliminators include Impedance Tolerant EMI/RFI filtering for premium power conditioning.

>> more >>

 

All SurgeX® products are backed by a 10 year warranty